Ruijie RG-S2600G-I Series - Page 377

CLI Reference IP Address Configuration Commands
Routing redirect: 0
Description of fields in the results:
Field
Description
IP interface state is:
The network interface is available,
and both its interface hardware
status and line protocol status are
“UP”.
IP interface type is:
Show the interface type, such as
broadcast, point-to-point, etc.
IP interface MTU is:
Show the MTU value of the
interface.
IP address is:
Show the IP address and mask of
the interface.
IP address negotiate is:
Show whether the IP address is
obtained through negotiation.
Forward
direct-broadcast is:
Show whether the directed
broadcast is forwarded.
ICMP mask reply is:
Show whether an ICMP mask
response message is sent.
Send ICMP redirect is:
Show whether an ICMP
redirection message is sent.
Send ICMP
unreachabled is:
Show whether an ICMP
unreachable message is sent.
DHCP relay is:
Show whether the DHCP relay is
enabled.
Fast switch is:
Show whether the IP fash
switching function is enabled.
Route horizontal-split is:
Show whether horizontal split is
enabled, which will affect the route
update behavior of the distance
vector protocol.
Help address is:
Show the helper IP address.
Proxy ARP is:
Show whether the agent ARP is
enabled.
ARP packet input
number: 0
Request
packet: 0
Reply
packet: 0
Unknown
Show the total number of ARP
packets received on the interface,
including:
ARP request packet
ARP reply packet
Unknown packet