Ruijie RG-S2600G-I Series User Manual

CLI Reference IPv6 Configuration Commands
Parameter
Description
Parameter
Description
verbose
Show the neighbor details.
static
Show the validity status of static neighbors.
vrf-name
VRF name
interface-id
Show the neighbors of the specified interface.
ipv6-addres
Show the neighbors of the specified IPv6 address.
Defaults
N/A
Command
Mode
Privileged EXEC mode.
Usage Guide
Show the neighbors on the SVI 1 interface:
Ruijie# show ipv6 neighbors vlan 1
IPv6 Address Linklayer Addr Interface
fa::1 00d0.0000.0002 vlan 1
fe80::200:ff:fe00:2 00d0.0000.0002 vlan 1
Show the neighbor details:
Ruijie# show ipv6 neighbors verbose
IPv6 Address Linklayer Addr Interface
2001::1 00d0.f800.0001 vlan 1
State: Reach/H Age: - asked: 0
fe80::200:ff:fe00:1 00d0.f800.0001 vlan 1
State: Reach/H Age: - asked: 0
Field
Meaning
IPv6 Address
IPv6 address of the Neighbor
Linklayer Addr
Link address, namely, MAC address. If it is not
available, incomplete is displayed.
Interface
Interface the neighbor locates.
State
State of the neighbor: state/H(R)
The values of STATE are as below:
INCMP (Incomplete): The address resolution of
the neighbor is underway, the NS is sent, but
the NA is not received.
REACH (Reachable): The switch is connected
with the neighbor. In this state, the switch takes
no additional action when sending packets to
the neighbor.
STALE: The reachable time of the neighbor
expires. In this state, the switch takes no

Ruijie RG-S2600G-I Series Specifications

General

Brand	Ruijie
Model	RG-S2600G-I Series
Category	Switch
Language	English