CLI Reference AAA Configuration Commands
By default, no number of users is limited.
Domain configuration mode.
This command limits the number of users for the domain.
The following example sets the number of users as 20 for the domain
named ruijie.com.
Ruijie(config)# aaa domain ruijie.com
Ruijie(config-aaa-domain)# access-limit 20
Enable the AAA security service.
Switchover the user level.
Define a local user database.
accounting network
Use this command to configure the Network accounting list. The no form of this command is used to
remove the setting.
accounting network {default | list-name}
no accounting network
Use this parameter to specify the default
method list.
The name of the network accounting list.
With no method list specified, if the user sends the request, the
device will attempt to specify the default method list for the user.
Domain configuration mode.
Use this command to configure the Network accounting method list
for the specified domain.
To Next Page
Loading...
Need help?
General