Ruijie RG-S2600G-I Series - Page 629

CLI Reference RADIUS Configuration Commands
Related
commands
Command
Description
radius set qos
cos
Set the qos value sent by the RADIUS server
as the cos value of the interface.
radius set qos cos
Use this command to set the qos value sent by the RADIUS server as the cos value of the interface. Use
the no form of this command to restore it to the default setting.
radius set qos cos
no radius set qos cos
Parameter
description
N/A.
Default
Set the qos value sent by the RADIUS server as the dscp value.
Command
mode
Global configuration mode.
Usage
guidelines
Set the qos value sent by the RADIUS server as the cos value, and
the dscp value by default.
Examples
The following example sets the qos value sent by the RADIUS server
as the cos value of the interface.:
Ruijie(config)# radius set qos cos
Related
commands
Command
Description
radius
vendor-specific
extend
Extend RADIUS not to differentiate the
IDs of private vendors.
radius vendor-specific extend
Use this command to extend RADIUS not to differentiate the IDs of private vendors. Use the no form of
this command to disable the function.
radius vendor-specific extend
no radius vendor-specific extend
Parameter
description
N/A.
Default
Only the private vendor IDs of Ruijie are recognized.