Ruijie RG-S2600G-I Series - Page 819

CLI Reference NFPP Configuration Commands
sho
w
nfpp
dhcp
-guar
d
host
s
Show the monitored host.
nfpp dhcp-guard enable
Use this command to enable the DHCP anti-attack function on the interface.
nfpp dhcp-guard enable
Parameter
description
Parameter
Description
-
-
Default
Settings
The DHCP anti-attack function is not enabled on the interface.
Command
mode
Interface configuration mode.
Usage
guidelines
The interface DHCP anti- attack configuration is prior to
the global configuration.
Examples
Ruijie(config)# interface G0/1
Ruijie(config-if)# nfpp dhcp-guard enable
Related
commands
Command
Description
dhcp-guard enable
Enable the anti-ARP attack
function.
sho
w
nfpp
dhcp
-guar
d
sum
mary
Show the configurations.