Ruijie RG-S2600G-I Series - Page 827

CLI Reference NFPP Configuration Commands
clear nfpp dhcpv6-guard hosts
Use this command to clear the monitored host isolation.
clear nfpp dhcpv6-guard hosts [vlan vid] [interface interface-id] [mac-address]
Parameter
description
Parameter
Description
vid
Set the VLAN ID.
interface-id
Set the interface name and number.
mac-address
Set the MAC address.
Default
Settings
N/A.
Command
mode
Privileged EXEC mode.
Usage
guidelines
Use this command without the parameter to clear all
monitored hosts.
Examples
Ruijie# clear nfpp dhcpv6-guard hosts vlan 1 interface g0/1
Related
commands
Command
Description
dhcpv6-guard
attack-threshold
Set the global attack threshold.
nfpp
dhcp
v6-g
uard
polic
y
Set the limit threshold and attack
threshold.
sho
w
nfpp
dhcp
v6-g
uard
host
s
Show the monitored host.
nfpp dhcpv6-guard enable
Use this command to enable the DHCPv6 anti-attack function on the interface.