CLI Reference NFPP Configuration Commands
Destination IPv4 address mask
Length of the destination IPv6
address mask.
Use this command to create a new user-defined
anti-attack type and specify the message fileds to be
matched.
Ruijie(config)# nfpp
Ruijie(config-nfpp)# nfpp define tcp
Ruijie(config-nfpp-define)#match etype 0x0800 protocol 0x06
Show the user-defined
anti-attack configurations
monitored-host-limit
Use this command to set the maxmum monitored host number.
monitored-host-limit number
The maximum monitored host
number. The valid range is
1-4294967295.
To Next Page
Loading...
