Ruijie RG-S2900G-E Series - Page 300

Configuration Guide GVRP Configuration
Port:GigabitEthernet 3/1
Display Current GVRP Configurations
Execute "show gvrp configuration" command to display the current GVRP status. This
command can be used to display the dynamic ports of dynamically created VLANs and
static VLANs.
Command
Function
Ruijie# show gvrp configuration
Display current GVRP configurations
Configuration example:
Ruijie# show gvrp configuration
Global GVRP Configuration:
GVRP Feature:enabled
GVRP dynamic VLAN creation:enabled
Join Timers(ms):200
Join Timers(ms):600
Join Timers(ms):10000
Port based GVRP Configuration:
Port:GigabitEthernet 3/1 app mode:normal reg mode:normal
Port:GigabitEthernet 3/2 app mode:normal reg mode:normal
Port:GigabitEthernet 3/3 app mode:normal reg mode:normal
Port:GigabitEthernet 3/4 app mode:normal reg mode:normal
Port:GigabitEthernet 3/5 app mode:normal reg mode:normal
Port:GigabitEthernet 3/6 app mode:normal reg mode:normal
Port:GigabitEthernet 3/7 app mode:normal reg mode:normal
Port:GigabitEthernet 3/8 app mode:normal reg mode:normal
Port:GigabitEthernet 3/9 app mode:normal reg mode:normal
Port:GigabitEthernet 3/10 app mode:normal reg mode:normal
Port:GigabitEthernet 3/11 app mode:normal reg mode:normal
Port:GigabitEthernet 3/12 app mode:normal reg mode:normal