Ruijie RG-S2900G-E Series - Page 361

Configuration Guide DHCP Configuration
Command
Function
Ruijie# clear ip dhcp conflict { address | *}
Clear the DHCP address conflict
information.
Ruijie# clear ip dhcp server statistics
Clear the DHCP server statistics.
To debug the DHCP server, execute the following command in the command
execution mode:
Command
Function
Ruijie# debug ip dhcp server [events |
packet]
Debug the DHCP server.
Monitoring and Maintaining the DHCP Client
There are two types of commands for monitoring and maintaining the DHCP
client. The following operations can be performed on the DHCP client:
Debug commands, used to output necessary debugging information. Such
commands are mainly used to diagnose and clear faults.
Show commands, used to show information about DHCP.
To debug the DHCP client, execute the following command in the command
execution mode:
Command
Function
Ruijie# debug ip dhcp client
Debug the DHCP client.