Ruijie RG-S2900G-E Series - Page 612

Configuration Guide GSN Configuration
to access the specified upgrade server using the restore action specified by the policy
server, and auto-install the patch programs.
After the “illegal user” completes all restore actions specified by the policy server, the
security agent detects the agent operation platform again. If all secure policy
collection respond to the agent, the security agent will notify the SMP of removing the
access list limitation of the agent and will be set as sthe normal user.
RG Security Switch
As part of the RG security solution, RG Security Switch is responsible for receiving
the policy from RG SMP, installing the policy and controlling the users according to
the installed policy.
Configuring GSN Security Switch
Enabling the GSN Security Switch
By default, the GSN security solution switch is enabled.
Command
Function
configure terminal
Enter the global configuration mode.
[no] security gsn enable
Enable the global GSN security switch.
The following example shows how to enable the GSN function:
Ruijie# configure terminal
Ruijie(config)# security gsn enable
Configuring the Community Between SMP Servers
The SMP server IP address and the security authentication name must be configured
to implement the community between the SMP servers.
Command
Function
configure terminal
Enter the global configuration mode.