Ruijie RG-S5750-H Series - Page 31

Hardware Installation and Reference Guide Product Overview
27
SFP Port
Not supported
SFP+ Port
10GBbase-R
1000Base-X
PoE
All RJ45 ports support PoE. Each port supports up to 30W PoE. The max power is
subject to the configured power supply.
The maximum number of PoE devices supported by the switch is determined
by the available PoE consumption of the switch and the actual PoE
consumption of each device.
PoE Wire Pair
Mode A (wire pair 1-2, 3-6)
Power
Consumption
Power consumption (PoE excluded) <60W
Power consumption (PoE included) <800W
Temperature
Operating temperature: 0 ºC to 50ºC
Storage temperature: -40ºC to 70ºC
Humidity
Operating humidity: 10% to 90% RH
Storage humidity: 5% to 95% RH
Altitude
0 to 5000m
Fan
Speed adjustment and fault alarm
Temperature
Alarm
Supported
EMI Standard
GB/T 9254.1
Safety
Standard
GB 4943.1
Dimensions
(W x D x H)
440 mm x 420 mm x 44 mm (without power supply module)
440 mm x 510 mm x 44 mm (with power supply module)
Weight
7.9kg (with two power supply modules and without packing material)
Product Appearance
The RG-S5750-24GT4XS-HP-H Ethernet switch provides 24 10/100/1000Base-T Ethernet ports, 4
10GE SFP+ ports, 1 MGMT port, 1 USB port, and 1 Console port on the front panel, as well as 2 power
module slots on the back panel.
Figure 1-21 Appearance of RG-S5750-24GT4XS-HP-H