Press here
HOW TO REPLACE THE BATTERY?
Ba�ery parameters：
Ba�ery type: NI-MH
Ba�ery voltage: 9.6V
Ba�ery capacity: 900mAh
Charging Time: 5~6hours
please rotatethis tab
Ba�ery Case Groove
Connect the battery cable
and put it into the groove
Make sure the power switch is on "OFF".
Remove the battery cover, keep pressing the connector buckle and pull the cable
off at the same time.
Connect the wire connector of the battery. Put the wire in the groove of the battery
compartment.
Restore the battery cover and fasten the tab of the cover.
output
To Previous Page
Loading...