EasyManua.ls Logo

RunCam Mini FPV DVR - Operating Instructions; LED Status Indicators; Recording Control; Micro SD Card Formatting

RunCam Mini FPV DVR
2 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Warning
* Recording files will be saved automatically by segment per each 5 minutes and recording stops when Micro SD card is full.
* It takes about 2G capacity for 1 hour recording. Thus an 8G Micro SD card can record about 3.5 hours.
* DVR won’t save the file automatically after power off. So please stop recording before power off. Otherwise, you will miss your last recording.
BUTTON
5V_OUT
3.3-5.5V_IN
GND
GND
VIDEO_IN
VIDEO_OUT
AUDIO_IN
BLUE LED
RED LED
LED Status
Red LED Constantly on — Power status light
Blue LED Constantly on — In standby mode
Blue LED Blink slowly (1 time per second)
In recording mode
Blue LED Blink quickly (2 times per second)
Micro SD is full or failed to be recognized
Start Recording
* Record automatically with power on
(Micro SD Card should be inserted in first).
* In standby mode, short press the button to start recording.
* In standby mode, long press the button, about 5 seconds,
till the blue LED is off, the SD card will be formatted and
recording will start.
Stop Recording
* In recording mode, short press the button, file will be saved and DVR will turn to standby mode.
Format Micro SD Card
* In standby mode, long press the button for 5 seconds, the SD card will be formatted and recording will start.