To Next PageTo Next Page
Need help?Do you have a question about the Rupes LHR 12E and is the answer not in the manual?
Details on polishing foam, backing pad, orbit, power, RPM, weight, speed control, and insulation class for LHR 12E and LHR 75E.
Explanation of pictographs including reading instructions, safety indications, PPE usage, and tool insulation class.
Reference to a separate safety booklet and general warnings about tool usage.
Information on the tool's intended use, accessory compatibility, speed ratings, and inspection.
Covers securing parts, starting up, tool and accessory assembly, foam application, start/stop, and RPM selection.
Instructions for removing the backing pad and polishing foam from the tool.
Specifies compatible polishing foam and backing pad sizes for LHR 12E and LHR 75E models.
Details noise and vibration emission values, compliance directives, and recommends ear protection.
Guidelines for maintenance with power disconnected and proper disposal according to WEEE Directive.
Declaration stating the tool conforms to relevant safety and directives, listing tested standards.
General