PTX Universal PanTilt Head
Model 2
Quick Setup Guide
* in the PTX box *
NEMA 5-15p to powerCON connector cable. The power
supply accepts AC110-240V 50/60Hz; Fuse T3 15A/250V;
power consumption 60W.
The following four HD15 short breakout cables are
included to allow connectivity with most camera types:
1) RS 422/485
2) RS 232
3) LANC
4) Panasonic Remote (two wires)
Cable bundle clamp and screw (if used with Blackmagic
Micro Studio 4K camera).
¼ x 20 x ½ thumb screw with washer for attaching
camera to tilt plate through the horizontal adjustment slot.
The Ctrl+R User Guide, PTX QUICK SETUP Guide, Model 1
and 2 Specifications and VISCA/DMX Connectivity sheets
are available on the PTX web page.
www.RUSHWORKS.tv/ptx.htm
To Next Page
Loading...