4
fit the tube and small brush
8 Turn to the rear of the cleaner.
9 Push the small brush into the clip on the left of
the cleaner.
10 Slide the crevice tool inside the extension tube for
ease of storage.
11 Put the end of the extension tube over the mount
on the bottom right of the cleaner, then push the
top of the extension tube into the clip on the right
of the cleaner.
11 Loop the hose over the hose rest on the handle.
the cable
12 Turn the upper cable rest to point upwards, then
wind the cable round the upper and lower cable
hooks.
13 When you want to release the cable, simply turn
the upper hook downwards, and the cable will fall
free.
carrying the cleaner
14 Normally, you’d just grab it by the handle, and trundle it round on its wheels, but if
you want to carry it upstairs, for instance, you need to be a bit more circumspect.
15 It’s fairly heavy, and it’s an awkward shape to carry, so grip the lower cable hook in
one hand, grip the top of the cleaner handle with the other, and lift.
what fits to what
16 The hose is permanently attached to the cleaner at one end.
17 The other end may be attached to the main tube or one of the accessories.
18 The accessories are the crevice tool, the extension tube, and the small brush.
19 To use the accessories, see opposite.
To Next Page
Loading...
