EasyManua.ls Logo

Russell Hobbs 13943 - Pedal Operation; Switch Operation

Russell Hobbs 13943
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
upright cleaning push the hose end over the main tube – this connects the main
brush, on the bottom of the cleaner, to use the cleaner upright
crevice tool push the hose end over the crevice tool – as its name implies, use
this tool to reach down the sides of upholstery, and into awkward
spaces, nooks, and crannies nothing else can reach
crevice tool and
extension tube
push the hose end over the thick end of the extension tube, then
push the thin end of the extension tube into the crevice tool – use
this to reach curtain rails, picture rails, and covings
small brush and
extension tube
push the hose end over the thick end of the extension tube, then
push the thin end of the extension tube into the small brush – use
it to remove pet hair, lint, and dust from blinds, curtains, and
upholstery; to brush/clean awkward corners
pedal
20 The pedal locks the cleaner and base together.
21 To use the cleaner as an upright, press the pedal down with your toe, ease the
handle back, then take your toe off the pedal.
22 This lets you push the cleaner forward and backward, to vacuum the floor.
switch 3
23 Press and release the switch 3 with your toe, to turn the motor on.
24 If you’ve finished, if you want to change the brush height for a different floor
covering, if you want to change from using it upright to using the hose, or if you just
want to stop for a cup of tea, press and release the switch 3 with your toe, to turn
the motor off.
25 Thats the rear of the cleaner dealt with. Lets turn it round and use it.

Related product manuals