7
57 Sit the iron on its heel.
58 Power the iron up, and wait till the light goes out.
59 Now hold the iron over the basin/bowl, with the soleplate down.
60 Press the C button, hold it in, and gently move the iron to and
fro, over the basin or bowl.
caution keep clear of the escaping water and steam
61 Water and steam will wash scale and dust through the soleplate,
and into the sink.
62 When the reservoir is empty, release the C button.
63 Unplug the iron, and sit it on its heel to cool.
64 When it’s cold, wipe off any moisture.
C ANTISCALE
65 The anti-scale agent incorporated in the iron helps prevent the
build-up of scale.
66 Don’t use descaling solution, you’ll destroy the anti-scale agent.
C CLEANING
67 Unplug the iron and let it cool down fully.
68 Wipe outer surfaces with a damp cloth.
69 Remove spots from the soleplate with a dab of vinegar – don’t
scratch it.
70 Don’t use harsh or abrasive cleaning agents or solvents.
D WIRING INSTRUCTIONS UK plugs only
The product must be earthed.
It has a 13A BS1362 fuse in a 13A BS1363 plug. To
replace the plug, fit the green/yellow wire to E or E,
the blue wire to N, and the brown wire to L. Fit the cord
grip. If in doubt, call an electrician. Don’t use a non-
rewireable plug unless the fuse cover is in place. If you
remove the plug, dispose of it.
To Next Page
Loading...
