selecting the cleaning mode
You can choose whether to set the unit to filter the air only or combine air filtration
with air sterilisation.
To turn the air sterilisation feature on press the button until ‘Purify Air’ flashes
on the LCD. Then press the button to turn the function on - the icon will be
displayed. Once the icon stops flashing and it remains constant then you know the mode is
selected. You can also activate this function by pressing the PURIFY AIR button on
The sterilisation feature is stronger when the fan speed is relatively low. Although
fewer bacteria, viruses, VOCs will be sucked into the main body with a slower fan
speed, the slower fan speed will give the pollutants more exposure to the chemical
reaction that decomposes them.
If you turn the sterilisation mode on whilst the unit is in Auto mode it will exit Auto
mode and the fan speed will come on at its previous level.
10
MODE
SET
air quality reading
The LCD display contains a bar that shows the ambient air quality.
This bar is determined by the readings from the dust and odour sensors.
The sensors will give you one of five readings depending upon the air quality.
If all five bars are illuminated this means the air quality is very good.
If only one bar is illuminated then it means that the air is very dirty.
This is directly linked to the fan speed setting within auto mode. The fan speed will
change according to how many bars are illuminated on the air quality meter reading.
ountain
BREEZE
CLEAN AIR
air quality air quality reading fan speed selected automatically
Excellent 2
Good 2
Average 4
Poor 4
Very Poor 4
the remote control.
To Next Page
Loading...
