The HEPA filter is highly effective at filtering the air and removing
99.97% of particles that are greater than or equal to 0.3 microns in size.
This filter is sealed in a plastic frame to ensure there is no air leakage so that all air
that passes through the air purifier is effectively filtered. Do not attempt to remove
the filter from this frame as it will result in damage.
The life of the filter will vary according to the atmospheric conditions it is used within.
In average conditions it should last for twelve months. The LCD display will alert you
periodically to check your HEPA filter.
A replacement part can be ordered when required.
You must remove the packaging surrounding the activated carbon filter before you use
the machine for the first time. It is packaged in a plastic bag so it arrives fresh.
This filter is highly effective at removing odour particles and smoke from the
atmosphere. The filter acts like a sponge and traps particles in its holes so they cannot
escape back into the atmosphere.
In particularly smoky environments the activated carbon filter will quickly clog up and
needs to be replaced to give optimal performance.
A replacement part can be ordered when required.
The filters have been placed in this sequence in order to give optimum filtration
efficiency combined with maximum filter lifespan. Do not swap their locations about.
The filtration system is the heart of your air purifier and you must maintain the filters
properly to ensure effective cleaning (see care and maintenance ).
When the machine is switched on it will start
filtering the air. When it is in standby mode it
does not filter the air. It is recommended
you operate your machine 24 hours a day
because indoor air can quickly become
polluted and constant filtration is the best
way to maintain a clean indoor environment.
Your air purifier has four different fan speeds
as well as an auto mode that you can choose
to suit your preferences.
8
2.HEPA filter
3.Carbon Filter
4. Air sterilisation function
Your air purifier is equipped with air sterilising ™ photocatalysis technology
that is proven to reduce bacteria, viruses, mould spores, odours and volatile organic
compounds (VOCs). It works by using a combination of the sterilisation mesh and ultra-violet
light to generate a chemical reaction to neutralize VOCs, bacteria and viruses that are
sucked into the air purification chamber.
5. Sterilisation process
The TiO
2
mesh is situated behind the three
UV tubes. This mesh is permanent and
replacement is not required.
ountain
BREEZE
CLEAN AIR
M
ODE
SET
TIMER
-
TIMER +
ON
/
O
FF
UV
tubes
double safety
switch
front panel
fixing clasp
front panel
fixing clasp
activated
carbon
filter
support
frames
sterilisation
mesh
To Next Page
Loading...
