Care and maintenance
Cleaning the Air Intake Filter
Note:
• CLEAN THE FILTER ONCE A MONTH. Failure to do so could cause the
safety cut-out to operate.
• The air intake filter must be in place whenever drying.
• Unplug the power cord prior to any cleaning.
1. Open the appliance door and remove the air intake filter just below
the door cavity.
2. Remove by holding the upper and lower parts of the air intake filter
and pull it away from the appliance. Remove the filter inside the
shroud by slightly pushing upwards with your thumb until the latch
hook disconnects. Remove the filter and and clean it with a soft
brush. Reassemble and install as before.
24
To Next Page
Loading...