EasyManua.ls Logo

Russell Hobbs RH3VTD800

Russell Hobbs RH3VTD800
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
Trouble shooting
Failure to heat may indicate the safety cut-out has operated. This cut-out
only operates if the airflow is severely restricted so make sure the filter is
clean, the air inlets and outlets at the front and back are not blocked.
If the safety cut-out operates you should contact Customer Services on
0345 208 8750.
If your machine does not work check the following before calling the
customer service helpline:
Check that the machine has the correct weight load in the drum before
starting the appliance.
Check that there is a supply of electricity or the machine is plugged in
and the power switched on.
Check that the door has been properly closed and the machine is
switched on (start button pressed, if fitted).
The child lock has not been activated.
Check the fuse in the plug.

Related product manuals