Russell Hobbs RH8CTD701

Trouble shooting
24
PROBLEM REASON SOLUTION
The dryer cannot be opened
or the programme cannot be
started. The dryer does not
get activated when adjusted
The dryer might not be plugged in.
Make sure that the plug is fitted in the
socket.
The loading door might be open.
Make sure that the loading door is properly
closed.
You might not have set a
programme or
pressed the Start/ Pause key.
Make
sure that the programme has been
set
and the dryer is not in the Standby
(Pause)
mode.
Child lock might be active.
Deactivate the child lock.
The programme has been
interrupted for no reason.
The loading door might not be closed
properly.
Make sure that the loading door is properly
closed.
There might have been a power failure.
Press the Start/Pause key to start the
programme
.
The water tank might be full.
Empty the water tank.
Clothes have shrunk, felted or
deteriorated.
The
programme
used might not be suitable
for the type of laundry.
Check the care labels on the laundry items,
select a suitable
programme
for the type of
laundry.
Water leaking from the
loading door.
There might be lint accumulated on the
inner surfaces of the loading door and on
the surfaces of the gasket of the loading
door.
Clean the inner surfaces of the loading door
and the surfaces of the gasket of the
loading door.
The loading door opens on its
own.
The loading door might not be closed
properly.
Push the loading door until you hear the
closing sound.
The water tank warning
symbol is on/flashing.
The water tank might be full.
Empty the water tank.
The water discharge hose might be bent.
If the product is connected directly to the
water outlet, check the water discharge
hose.
The filter cleaning warning
symbol is on.
The lint filter might be unclean.
Clean the filter.
The condenser cleaning
warning symbol is on.
The condenser might be unclean.
Clean the condenser.
The filter cleaning and
condenser warning symbol
are flashing.
The filter seat might be clogged by lint.
Clean the filter seat.
There might be a layer that causes
obstruction on the surface of the lint filter.
Wash the filter with lukewarm water.
The condenser might be clogged.
Clean the condenser.