30
HOW TO USE THE MICROWAVE
Pre-set time to start functions
Set the clock first. (Consult the instructions for setting the clock)
Input the cooking program. It’s possible to input a maximum of 3
cooking stages. Defrost function should be set as the first stage. The
auto menu can be set for a single stage only.
Example: if you want to cook with 80% microwave power for 7 minutes,
to start at a given time.
1. Press the “POWER" button once;
2. Turn the “TIMER/POWER/WEIGHT” dial to choose 80% microwave
power till "P80" is displayed;
3. Press “POWER" button to confirm;
4. Turn the “TIMER/POWER/WEIGHT” ” dial to adjust the cooking time
to 7 minutes;
5. After the above steps, DO NOT press "START/+1MIN“ button, but do
as follows :
6. Press the "CLOCK/PRE-SET“ button, the current time displays and the
hour figures flash.
7. Turn “TIMER/POWER/WEIGHT” dial to adjust the hours, the input
time should be within 0 -23. Press "CLOCK/PRE-SET“ button and the
minute figures will flash. Turn the “TIMER/POWER/WEIGHT” dial to
adjust the minutes, the input time should be within 0 - 59. This sets the
start time.
8. Press "START/+1MIN“ to finish setting.
The ":" will illuminate, the buzzer will ring twice when the time to
start arrives, and then cooking will start automatically.
Note: The clock must be set first. Otherwise, the pre-set function will
not work.
To Next Page
Loading...
