33
HOW TO USE THE MICROWAVE
Multi-Stage Cooking
A maximum of two different stages. To set a maximum of two different
stages. For instance, to defrost an item and the follow it with the cooking
cycle.
Note: The buzzer will ring once after each stage and then the next stage will
proceed.
Note: The Auto menu or the pre-heating functions cannot be set as one of
the multi-stage cooking.
If one of the stages is for defrosting this should be programmed to come on
first .
Example: if you want to defrost 500g of food or by 1 minute, then cook it at
80% microwave power for 7 minutes. The steps are as follows:
1) Press “ WEIGHT DEFROST or TIME DEFROST “ button once, the screen
will display “dEF1” or “dEF2”
2) Turn the “TIMER/WEIGHT/AUTO MENU” dial to adjust the defrost weight
to 500g or 1:00 minute;
3) Press the “MICRO./GRILL/COMBI/CONV.” button once;
4) Turn the “TIMER/WEIGHT/MENU” dial to choose 80% microwave power
until it displays "P80“.
5) Press "START/+30SEC/CONFIRM“ button to confirm;
6) Turn the “TIMER/WEIGHT/MENU” dial to adjust the cooking time to 7
minutes;
7) Press the "START/+30SEC/CONFIRM“ button to start the cooking process.
To Next Page
Loading...
