Russell Hobbs RHCHS1001 - How to change the fuse

How to change the fuse
1. Slot the end of a screwdriver into the
recess in the fuse holder of the plug.
2. Pull the fuse holder upwards until free
of the plug and slide the fuse out.
3. Replace the fuse and replace fuse
holder, pushing down until locked into
place.
Important: Only ever use 13 amp fuses.
Supplier Trade
Mark
Russell
Hobbs
Model Number
RHCHS1001
Annual Energy
Consumption
(kWh/annum)
26.5 A
Rate Input
Power
(W)
450W -
Dust Pick
Up on
Carpet (
dpu)
0.71 G
Dust Pick Up on
hard floor
(dpu)
1.05 – 1.08 C
Dust Re
-
emission(%)
0.6 – 1.0 F
Sound Power Level
(dB(A))
73 -
13