Adjusting salt consumption
Adjust the w
ater softener according to how hard your tap water is.
Move the programme selector knob to the 0 (Reset) position while your machine
is not in operation.1
After resetting your machine, press th
e Start/Pause button and keep it pressed
down.2
Meanwhile, energise the machine by pressing the Power On/Off button. 4
Keep Start/Pause keys press until program monitor lights are on and off. 2
After the lamps “Wash/Dry/End” have flashed 3 , release the Start/Pause
button. 2
Your machine displays the latest enter
ed water hardness setting.
You can adjust the levels by pressing the Start/Pause button 2 according to
Table of Water Hardness Level Setti
ngs.
After adjusting the water hardness level , press on/off button to save the
settings in memory. 4
13
To Next Page
Loading...
