Usage
Dur (cook for a desired time period)
This function is used to cook for a desired time range (the maximum cooking
period is 10 hours). To start cooking you need to turn the oven function and
temperature dials to the required function and temperature. The food that is to
be cooked needs to be put into the oven.
1. To set this mode, press the mode button until "Dur" is shown on the
display.
2. Press the " +" or "- " button and the hour figure and the “A” symbol will start
to flash, to adjust the cooking time press the " +" and "- " buttons.
3. Once the required hour time has been reached press the mode button
and the minute figures will start to flash, to adjust the cooking time press the "
+" and "- " buttons.
4. Once the required minute time has been reached press the mode button
to confirm the cooking time and the “A“ symbol will stop flashing and stay lit.
The oven will start to operate and the display will revert to clock time while
time counts down.
5. When the cooking time has been reached, the oven will beep, the "A" symbol
will flash on the display and the oven will automatically be turned off. Press
and hold any button for 3 seconds to stop the beeping and the “A” symbol
flashing.
6. If you wish to continue cooking then press and hold the mode button for
more than 3 seconds. The timer will enter manual mode and the symbol
will be shown on the display.
7. If you don’t wish to continue cooking then turn the oven function and
temperature dials to the off position.
For Customer Services & Spare Parts please call 0345 208 8750
Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm
or visit us at www.productcare.co.uk
18
To Next Page
Loading...
