Usage
Manual mode:
In manual mode, only the time and the symbol will be shown on the display.
The cooking duration has to be controlled by the user (the oven will run
continuously until turned off).
To start cooking you need to turn the oven function and temperature dials to the
required function and temperature. The oven light will turn on and the oven will
start to heat up. Once the oven is preheated, carefully put the food that you wish
to cook into the oven.
Note: In manual mode, if after 5 hours no button has been pressed the display on
the oven will flash to warn you that it will turn off and automatically enter standby
mode. After 10 hours the oven will automatically turn off and enter the standby
mode. When the display is flashing in manual mode, press any button to continue
using the oven. If you don’t want to continue using the oven then turn the oven
function and temperature dials to the off position. You can then if you wish put
the oven in standby mode by pressing and holding the mode button and the
“+” buttons together for more than 3 seconds. The timer will now enter the
standby mode.
Note: If you set ‘Dur’ or ‘End’ modes, then after cooking the oven will
automatically turn off and enter the standby mode.
16
To Next Page
Loading...
