Usage
4. Once the required minute time has been reached press the mode button
to confirm the cooking time and the “A“ symbol will stop flashing and stay lit.
The symbol will disappear from the display and the display will go to
manual mode. The oven will start operating at the time calculated by
deducting the cooking period from the set finishing time, and will stop at the
set finishing time.
5. An audible warning will be given and the "A" symbol will begin to flash on the
display when the set finishing time has been reached.
6. When the cooking time has been reached, the oven will beep, the "A" symbol
will flash on the display and the oven will automatically be turned off. Press
and hold any button for 3 seconds to stop the beeping and the “A” symbol
flashing.
7. If you wish to continue cooking then press and hold the mode button for
more than 3 seconds. The timer will enter manual mode and the symbol
will be shown on the display.
1. If you don’t wish to continue cooking then turn the oven function and
temperature dials to the off position.
Note: Once setting full-automatic mode, the time can only be changed by
cancelling the programme and resetting it.
Open Door Detection
Your oven has an open door detection function.
• If the door is opened during cooking, the cooking will be suspended and ‘DOOR
will show on the display. Closing the door will automatically resume the
cooking.
• If the door is opened during ‘End’ or ‘Dur+End’ settings, the end time will not
be affected, and if the door is opened during ‘Dur’ setting, the cooking will be
suspended, closing the door will automatically resume the cooking.
• If the door is opened during setting selection before it has started, the
appliance will revert to Manual mode.
• If the door is opened during ‘Minute Minder’ mode, the end reminder time will
not be affected.
• If the door is opened during ‘Standby’ mode, alternative settings cannot be
selected until the door is closed.
21
To Next Page
Loading...
