Russell Hobbs RHM2079A

25
HOW TO USE THE MICROWAVE
Pre-set cooking function
You can set your microwave to start cooking at a pre-set time, without the need
to be present to input the programmes. Make sure your food is in the
microwave and prepared when you programme the pre-set function.
You will need to set the clock and the cooking menu and time.
It is possible to input a maximum of 2 cooking stages. Do not use the defrost
function in the pre-set function. The auto menu can be set for a single stage
only.
Pre-set cooking function example
If the current time is, say, 12:30 and you want the microwave to cook on 80%
power for 7 minutes at 14:20:
1. With the colon flashing on the display screen, press the ’Power’ button once.
2. Turn the ‘'Timer/Weight/Auto Menu’ dial to choose 80% microwave power
– ‘P80’ is displayed.
3. Press ‘Start/+30Sec/Confirm’ button to confirm.
4. Turn the ‘Timer/Weight/Auto Menu’ dial to adjust the cooking time to 7
minutes.
5. After the above steps, DO NOT press ‘Start/+30Sec/Confirm’ button, but do
as follows:
6. Press the ‘Clock/Pre-Set’ button, the current time displays and the hour
figures flash.
7. Turn ‘Timer/Weight/Auto Menu’ dial to adjust the hours to display ‘14:’.
Press ‘Clock/Pre-Set’ button and the minute figures will flash. Turn the
‘Timer/Weight/Auto Menu’ dial to adjust the minutes to display ‘20’. This sets
the start time.
8. Press ‘Start/+30Sec/Confirm’ button to finish setting.
The ":" will illuminate, the buzzer will ring twice when the set start time arrives,
and then cooking will commence automatically.
If you wish to cancel the pre-set cooking, press the ‘Stop/Clear’ button.