USING YOUR AIR CONDITIONER
FAN Mode
When using the appliance in this mode, the air hose does not need to be
attached.
To set this mode correctly:
‐ Press the MODE button several times until the FAN mode indicator
light appears.
‐ Select the required fan speed by pressing the FAN button.
‐ There are 2 fan speeds to choose from: High & Low
= HIGH SPEED = LOW SPEED
As figured here:
DEHUMIDIFY Mode
Ideal to reduce room humidity (good for use in spring, autumn, damp
rooms and rainy periods)
When in DEHUMIDIFY mode the appliance should be prepared in the
same way as for COOL mode, with the air exhaust hose attached to enable
the moisture to be discharged outside.
To set this mode correctly:
‐ Press the MODE button several times until the DEHUMIDIFY mode
indicator light appears, will also appear on the display screen. (as
seen below)
‐ In this mode, the fan speed is automatically selected by the appliance
and can not be set manually.
RHPAC3001 r4.1 13
To Next Page
Loading...
