Rustibus 2000 Electric Low - Page 11

REMOVING THE CHAIN DRUM
REMOVING THE DISPOSABLE CHAIN DRUM
Information guide on how to remove the Chain Drum.
Genuine Rustibus® parts only! Machine may vary from pictures
1.Removing the Chain Drum from
Rustibus® 2000 Series is the same
for all types : low, standard, electric,
pneumatic and our Atex/Ex Certied
machines.
4. With use of a screw driver and rotating the chain drum with your hand you
can remove both belts. DO NOT PUT YOUR FINGERS IN BETWEEN!
Watch your ngers!
2.Remove belt cover 3. Lay down machine like the picture
so the chain drum is free to rotate.
(On the LOW machine you have to
put the machine in a upright
position (on the power weight/at
front) so the chain drum is free to
rotate).
5. Put the machine on a support
that stops the chain drum rotating.
Remove pulley (see explanation on
the next page how to)