Rustic Idaho - Idaho Shed Assembly Guide; Tools Required for Assembly; Preparation Before Assembly; Shed Assembly Safety Guidelines

• Baery Drill
• Riveter
• Hammer
• Tape Measure
• Ladder
• Skillsaw
• Level
• Square Drive Bit—No.2
• 3/8 Hex Drive Bit
• 8mm Hex Drive Bit
• Drill Bit 3.2mm
• Square Drive bit No.2
• Read all instrucons carefully.
• Idenfy all parts and check quanes against checklist.
• Do not aempt to build your shed in high winds.
• Beware of sharp edges, use gloves if you have a pair.
• Protect your eyes and ears.
• Use electric tools with care. Use a Safety Trip Switch.
• It is easier and quicker if this shed is erected by two people.
• Your shed must be level. Achieve this by either levelling the
ground or by using blocks.
Tools Required:
Select your site:
Safety:
Before you start:
PG 1
IDAHO