QUICK USE MANUAL 68090258
ORIGINALE
!"#$%&'()*%
+,8
4. LIFTING AND TRANSPORTING THE MACHINE
A) LOADING/UNLOADING USING RAMP
• #2/7/#$,/+2,(2
• &/#2//++(3
• #/+0;$3C'+://'#/B#2)#/#2#+#3*
• &/#2//,0/'+,/-?S//3#00,
'$:#
• &/0:'7' :33://#,0#,/++#/
#0'/:/0,$(:
• D #'' / / # :/ / : ( ,/3 ($ $, +++3C
(://'#/'7/#0+
COME ON THE RUMP ALWAYS THE MEWP IN THE SENSE INDICATED IN THE DRAWING, INDIPENDENTLY IF
YOU LOAD OR UNLOAD THE MEWP. CAGE UP AND ENGINE DOWN
A$,/7,$'+0#3+(03/G(('7$
,$##0/(2://'+
Procedure: - push continually the button 1 and move upward and downward the switch 2
!
ATTENTION: Use the specific anchor point to se
curely fasten the platform on trailer or truck,
using a nylon straps and not chains.
MAXIMUM PULL-OUT STRENGTH OF THE NYLON STRAPS IS 50 daN.
Do not over tighten the straps when securing the aerial platform to the transport vehicle.
They can produce enough force to damage machine components.
To Next Page
Loading...