QUICK USE MANUAL 68090258
ORIGINALE
!"#$%&'()*%
+,"
There are three phases to stabilize the machine correctly:
1. Lower the four stabilizers towards the ground
2. Simultaneously lift the two stabilizers that are on the downhill side
3. Simultaneously lift the two stabilizers on the opposite side until the machine is level
N.B: Verify the right levelling of machine looking the optical level placed on the turret.
!
WARNING: It is important lift the crawlers from the field also for few centimetres
.##(C3$/$:30/#20'/,$7000:
#'D//+0'(C/##0/#2://,$$
$#0/(30/+0'
ATTENTION: THIS COULD BE CAUSE OF SERIOUS OR FATAL INCIDENT.
- Automatic Stabilization:
D//$'#(C#7/($CC'$$/''
:/#/ / 3' ##$ / , 7,+ / $ /($CC #$$
$&$/'+#$#//:7,/,/0#,0'/0
NOTE: Verify the right levelling of machine looking the optical level placed on the turret.
Automatic Destabilization:
To Next Page
Loading...