Need help?Do you have a question about the Ruwac industriesauger NA 7-11 and is the answer not in the manual?
General| Brand | Ruwac industriesauger |
|---|---|
| Model | NA 7-11 |
| Category | Water Filtration Systems |
| Language | English |
Essential safety and operational guidelines for the wet separator, emphasizing user responsibility.
Comprehensive safety advice, user responsibilities, and general precautions for operating the equipment.
Details specific safety measures for electrical grounding, flammable gas handling, and proper shutdown procedures.
Guidelines for safely transporting the wet separator, including cleaning and securing the equipment.
Instructions on proper placement, ventilation clearance, and storage conditions for the wet separator.
Ensures correct assembly by verifying floor capacity and accessory connections.
Procedures for cleaning the equipment, including recommended agents and personal protective equipment.
Guidelines for performing maintenance and repairs, emphasizing disconnection from power supply.
Procedures for dismantling and disposing of the wet separator in compliance with national legislation.
Defines hazardous zones (Zone 1 and Zone 2) related to flammable gas formation around the degasification valve.
Explains how the wet separator captures dust and liquid via swirling action and filtration.
Details the water consumption rate of the NA 7-11 when used with a water seal.
Specifies intended applications, suitability for Zone 22, and handling of various media types.
Outlines incorrect operational practices, such as incorrect liquid levels or operation in freezing temperatures.
Describes dust class (M and optional H) for filter cartridges and suitability for Zone 22 applications.
Details the setup and functional components of the standard NA 7-11 wet separator model.
Explains the setup and integration of the NA 7-11 wet separator with additional peripheral equipment.
Describes fixed guards for mechanical parts and risks associated with their removal during operation.
Details protection against electrical hazards, including insulation and fixed guards for live components.
Addresses risks from hazardous media like flammable gas and emphasizes proper storage and degasification valve function.
Instructions for establishing equipotential bonding using grounding clips and angle sockets for safety.
Guides on how to safely switch the wet separator unit on and off, including applying the parking brake.
Procedures for filling and topping up the liquid container, including visual monitoring and automatic shutdown.
Details how to check the correct operation of the degasification valve before and during use.
Steps for emptying and cleaning the main container, based on vacuum gauge readings or sludge presence.
Instructions for cleaning or replacing the moisture separator to maintain optimal performance.
Guidance on cleaning the viewing panel and the fill level indicator window for clear visibility.
Instructions for reassembling the wet separator after cleaning, including container and suction connection.
Describes how to visually check the liquid level using the viewing panel on the separator.
Explains the automatic fill level monitoring system with its warning light and shutdown features.
To Next Page