CLASSIC MODELS: 24002C, 24002D, 24003D, 24009, 24010 & 24013
LoPro SJ24 MODELS: 24028 & 24008
FOR USE ON ALL RECREATIONAL VEHICLES
LEVELING SCISSORS JACKLEVELING SCISSORS JACK
IMPORTANT: READ THE FOLLOWING INFORMATION BEFORE OPERATING YOUR JACK!
WARNING!
THIS LEVELING SCISSORS JACK IS DESIGNED TO:
LEVEL AND STABILIZE THE FRONT AND REAR OF ALL RECREATIONAL VEHICLES BY REDUCING
THE AMOUNT OF SUSPENSION FREE-PLAY WHEN PARKED FOR CAMPING
• DO NOT ATTEMPT TO USE THIS SCISSORS JACK TO LIFT EXCESSIVE WEIGHT OR TIRES OFF THE GROUND -
VEHICLE FRAME AND DOOR JAMB DAMAGE MAY OCCUR. USE ONLY STOCK HANDLE SUPPLIED.
DO NOT USE A CHEATER BAR ON HANDLE.
• DO NOT ATTEMPT TO USE THIS SCISSORS JACK FOR ANY PURPOSE OTHER THAN ITS INTENDED DESIGN.
• DO NOT USE THIS SCISSORS JACK AS A TIRE CHANGING JACK.
WARNING: Do not use a cordless drill or cordless impact to operate the product unless the drill has
an adjustable chuck. If the product was supplied with a manual handle or ratchet, please use that to
operate the product. This allows you to feel the resistance during operation. A cordless drill or impact
will cause damage to the product unless the adjustable chuck is set appropriately. NEVER use a cordless
impact on an electric motor with a manual override.
CAUTION: Some RV’s may be designed and manufactured with sub-frames that are not capable of handling
additional force over and above the intended strength to support the cabin weight. Contact your RV manufacturer
for sub-frame strength information prior to using this Leveling Scissors Jack. NORCO CANNOT BE HELD RESPONSIBLE
FOR ANY DAMAGES DUE TO IMPROPER USE OF THIS PRODUCT. NORCO CANNOT BE HELD ACCOUNTABLE FOR THE
STRUCTURAL INTEGRITY OF ANY RV FRAME.
INSTALLATION AND OPERATING INSTRUCTIONS
®
To Next Page
Need help?
General