SnapPad XTRA Installation Instructions
Congratulations on joining the SnapPad family!
Very Important Notes:
It is critical that you install the correct SnapPad on the proper foot. Please triple check
prior to installing your SnapPads. Permanent damage could result from trying to install on
the wrong landing foot, resulting in your warranty being voided. Your XTRA’s are designed
to work with 9” round jack feet that are commonly found on Lippert™* leveling systems.
*Trademark is owned by mark owner. SnapPad and its goods are not ailiated with or
endorsed by the mark owner.
To Next Page
Loading...