9. Pour the Lava(F) around the burner. Ensure the
Lava(F) is not placed on the ignition part of the
burner.
9
Assembly instructions
8.Turn the cylinder valve on the tank clockwise to
close the propane tank. Attach the preassembled
regulator from the table top(A) to the cylinder valve
by turning the regulator coupling nut clockwise
Make sure it is fastened securely and tighten
connections by hand only.
10.When the gas furnace is not used outside, it
should be covered with a Protective cover (G) to
prevent the product from oxidization caused by
exposure to sun and rain.
Pressure
reliefvalve
Cylinder valve
Black coupling nut
turn clockwise to connect
Regulator
Bleed-off
valve
turn clockwise
to reseal
F
G
C
A
U
T
I
O
N
H
O
T
S
U
R
F
A
C
E
To Next Page