Need help?Do you have a question about the Ryobi EMS180RG and is the answer not in the manual?
Keep the work area clean, well-lit, and free from flammable atmospheres. Keep bystanders away.
Proper electrical connections, avoiding wet conditions, and cord care to prevent shock hazards.
Stay alert, wear PPE, prevent unintentional starting, and maintain proper footing and balance.
Use correct tool, maintain it, disconnect power for adjustments, and store properly.
Wear safety goggles/mask; avoid wet sanding and large sandpaper pieces.
Use dust bag, empty frequently; use respirator for lead paint/treated wood.
Supervise users with limited abilities and ensure children do not play with the tool.
Familiarize yourself with the sander's capabilities, switch, and variable speed control.
Use different pads for tasks; understand the circular sanding motion for finishes.
Details on the dust collection box and its function for minimizing dust.
Guidance on choosing correct grit and type for material removal and finish.
Instructions on how to operate the power switch to turn the tool on and off.
Proper workpiece securing, placement, movement, and avoiding forcing the tool.
Tips for detail sanding in corners and instructions for emptying the dust collection box.
Clean with cloths, avoid solvents; bearings need no lubrication.
Sanding sheets can be cleaned for reuse by rubbing with a rubber block or shoe sole.
Explains safety alert, PPE, electrical symbols (V, Hz, AC, W), and speed indicators.
Defines RCM, double insulation symbols and provides guidance on recycling waste electrical products.
To Next Page
General
