ACCESSORIES
20
Fig. 26
Using featherboard flaps
See Figure 26
The featherboard flaps provide support for the workpiece
by holding it securely, which helps minimize chatter and
kickback.
Insert the 2 featherboard flaps into the fences as shown
below.
Routing small workpieces
See Figure 27
Scrap pieces will provide extra stability and support when
routing a small workpiece or ends of large workpieces.
1. Small workpiece 2. Scrap piece
2
1
Fig. 27
Bdal 6144.461 3Sprachen 04.06.2005 11:56 Uhr Seite 20
To Next Page
Loading...
