S4A TF1 - Page 6

- 6 -
Add and Delete Users
Enter
programming
Menu
Operation steps
Description
Default
value
Press * Admin
code #
(Default admin
code is
"999999")
11
Read card
/ Input a fingerprint twice... *
Add card users or fingerprint users
continuously
“…” means
repeating
the previous
operation,
Press * key
to exit.
Press 8 or 10 digits card
number # … *
Add card users by card number
Press ID number # read
card
/ Input a fingerprint twice … *
Add card users or fingerprint users
by specific ID number
Press ID number # press 8
or 10 digits card number # …
*
Add card users by specific ID
number and card number
Press ID number # press
code # … *
Add an independent user code by
specific ID number
12
Read user card, input the
first fingerprint twice, input
the second fingerprint
twice...*
Match fingerprints to a card
(Maximum 2 fingerprints)
13
Press ID number # press 8
or 10 digits card number #
input card quantity #
Add conductive number card
Delete users
21
Read card
/ Input a fingerprint once … *
Delete card users by reading card
/ Delete fingerprint users by
inputting fingerprint
“…” means
repeating
the previous
operation,
Press * key
to exit.
Press 8 or 10 digits card
number #… *
Delete card users by card number
Press ID number # … *
Delete users by ID number
20
0000#
Delete ALL users
Access Ways