Saab 1987 900 - Scheduled Maintenance Program

70 Car care and scheduled maintenance
and wheel housings, which are exposed
to
abrasion by flying gravel, etc. If the
composition has worn or flaked off, the
steel must be thoroughly cleaned and
dried before a fresh coat is applied. The
cleaning is best done with a scraper and
a steel wire brush, followed by washing
with solvent. Apply the new coating
thinly,
as otherwise it may run off or fall
off when dry .
Owner assistance
Service problem assistance
The Warranties/Service Record Booklet
which accompanies this manual contains
the
new car and emission control system
warranties and owner assistance informa-
tion.
There are Saab Consumer Relations Re-
presentatives at each of Saab-Scania of
America, Inc.'s four regional offices in the
continental u . S. (Alaska and Hawaii are
served by the Western Region, Puerto Rico is
handled by an independent importer.)
For detailed information about how to ob-
tain assistance, please refer to the Warran-
ties/Service Record Booklet.
Eastenl Region:
P.O. Box 697
Orange, CT06477
(203) 795-1326
Southenl Region:
425 Franklin Rd
Suite 550
Marietta, GA 30067
(404) 423-0150
SG 673
Western Region:
20 000 Mariner Ave
Suite 500
Torrance, CA 90509
(213) 214-0094
Central Region:
10415 United Parkway
Schiller Park , IL 60176
(312) 671-4920
Service information
Service Manuals for Saab vehicles can be or-
dered through the dealer . The complete 900
Manual is comprised of several sections in
ring -type binders. Sections may be ordered
individually. Consult your Saab dealer for
part numbers and list prices for sections
applicable to your model. A list of
authorized sales and service dealers is avail-
able from your local Saab dealer for those
planning to travel in the United States and
Canada.
Maintenance schedule
The maintenance schedule prescribes a
program of instructions to the purchaser/
operator of a 1987 Saab for maintenance
which is reasonable and necessary to ensure
the proper function, durability, and safety
ofthe Saab automobile in normal use. The
schedule is divided into two parts: Emission
System Maintenance and Vehicle Mainte-
nance. The Emission System Maintenance
instructions specifY operations to ensure
proper and safe function of Saab emission
control systems
throughout the useful life
of the automobile. Additional maintenance
is specified for certain components when