Perimeter Lights
Press q until PERIMETER LIGHTS: ON appears in the
display. To select your preference for perimeter lighting,
press
r while PERIMETER LIGHTS: ON is displayed
on the DIC. Pressing
r will scroll through the following
settings:
PERIMETER LIGHTS: ON (default): The headlamps
and back-up lamps will come on for 40 seconds,
if it is dark enough outside, when you unlock the vehicle
with the Remote Keyless Entry (RKE) transmitter.
PERIMETER LIGHTS: OFF: The perimeter lights will
not come on when you unlock the vehicle with the RKE
transmitter.
To select a setting and move on to the next feature,
press
q while the desired setting is displayed on
the DIC.
Easy Exit Seat
Press q until EASY EXIT SEAT: OFF appears in the
display. To select your preference for seat position
exit, press
r while EASY EXIT SEAT: OFF is
displayed on the DIC. Pressing
r will scroll through
the following settings:
EASY EXIT SEAT: OFF (default): No seat exit recall
will occur.
EASY EXIT SEAT: ON: The driver’s seat will move to
the exit position when the key is removed from the
ignition.
To select a setting and move on to the next feature,
press
q while the desired setting is displayed on
the DIC.
See “Easy Exit Seat” under Memory Seat on page 1-3
for more information.
3-54
To Next Page
Loading...
