LUGGAGE AND CARGO SPACE
The back seat area can
be
converted,
if
required,
into
additional cargo space on the station wagon
principle
by
rearrangement
of
the cushions
as
follows
:
Release
the backrest catch and the seat cushion catch
(see
illustrations). On the
2-door
model,
lift
the
front
edge
of
the cushion and tip the cushion forward. On the
4-door
model,
the
seat cushion can be tipped forward
directly. The seat cushion
should stand on edge behind
the front seats.
Pull the backrest forward and down.
It
is
also possible
to
bed
down
in the cargo space. In the
2-door
model, the
following
rearrangements can be made
to gain
additional leg room
for
bedding:
Passenger compartment with normal trunk space
catch, backrest
Slide the front seats
as
far forward as
they
will go
and
drop
the backrests forward.
Undo
the
two
screws
holding
the back seat cushion and place the
cushion
as
a bolster between the front and back seats and
drop
the
backrests forward.
Extended cargo space with back seat
dropped
Seat cushion catch.
2-door model
Seat cushion catch,
4-door model
23
To Next Page
Loading...
