SaberTec Golden Harvest v4 - User Manual

Quick Setup Guide
This guide provides the most essential information for setting up your Golden Harvest v4, offering a
simpler overview than the full manual. For detailed instructions and advanced configurations, please
refer to the complete manual.
Wiring Diagrams
The picture below shows the pads of the GHv4, whose functions are specified in the table. To create
wiring diagrams tailored to your specific setup, you can use our online tool:
https://sabertec.net/wiring-diagram-creator/
Pad
Function
Remark
Batt. -
Connect to negative of battery
Two identical pads that are internally
connected
Batt. +
Connect to positive of battery
Two identical pads that are internally
connected
Spk. -
Connect to negative of speaker
Spk. +
Connect to positive of speaker
Strip 1
Connect to data line of the Neopixel
blade
Resistor is already included on the board
Strip 2
Connect to data line of the Neopixel
accent LEDs
Resistor is already included on the board
Strip 3
Connect to data line of the Neopixel
side blade
Resistor is already included on the board

SaberTec Golden Harvest v4 Specifications