ELSA
7
4. If the firing pin is still in place, pull
the yellow belt to free the pin.
5. If there is still no sound, access the
reducer/cylinder valve and pull the red
EMERGENCY PULL disc.
6. Pull the hood from the bag.
7. Place the palms of the hands
together and insert through the rubber
neck seal. Open the hands to open the
hood.
CAUTION:
• Ensure that finger nails and
rings do not snag or tear the
neck seal.
• Do not roll or fold the neck seal
when donning the hood.
8. Hold the hood with the neck seal
over the crown of the head and pull the
hood down over the head until the neck
seal is around the neck. Check that
clothing or hair is not trapped in the neck
seal.
To Next Page
Loading...
