6 7
STEREO PAIRING:
CONNECTING TWO WOOFIT GO SPEAKERS
If you have two WOOFit Go speakers it is possible to create a stereo
pair with one speaker playing left channel, and one speaker playing right
channel. Before using the guide below, you must connect one speaker to
your Bluetooth device following the previous guide on how to play music
via Bluetooth.
1. Power on both speakers clicking the Power button
2. Click the Power button three times to enter pairing mode (the
indicator light will ash green in correct pairing mode). Repeat this for
both speakers
3. The speakers will connect in a few seconds. A constant green
light indicates correct connection, and you will hear the message
“connected”
OPERATION INSTRUCTIONS
Short press/click: Power on
Long press: Power off
Short press three times: Enter/exit stereo pairing of two WOOFit Go
speakers
Receiving an incoming call while connected via Bluetooth:
Short press: Answer the call
Double click: Refuse to answer the call
End phone call while connected via Bluetooth:
Short press: End the call
Bluetooth connected:
Short press: Play/pause music
Double click: Disconnect Bluetooth
Bluetooth disconnected:
Double click: Automatic connect back
To Next Page
Loading...