EasyManua.ls Logo

Saeco HD8769 Moltio - Frothing Milk

Saeco HD8769 Moltio
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
45
ENGLISH
45
FROTHING MILK
Warning:
Danger of scalding! Dispensing may be preceded by jets of milk and
steam. Wait until the end of the cycle before removing the milk carafe.
1
Fill the milk carafe with milk. The milk level must be between the mini-
mum (MIN) and maximum (MAX) level indicators shown on the milk
carafe.
Note:
Use cold (~5 °C / 41°F) milk with a protein content of at least 3% to ensure
optimum results when preparing a cappuccino. Whole milk or skimmed
milk may be used depending on individual taste.
2
Insert the carafe into the machine.
3
Pull out the milk carafe dispenser to the left up to the icon.
Note:
If the milk carafe dispenser has not been pulled all the way out, milk may
not be properly frothed.
4
Place a cup under the carafe dispenser.

Table of Contents

Related product manuals